Precision four-column hydraulic cutting machine HD-35T
+
  • Precision four-column hydraulic cutting machine HD-35T

Precision four-column hydraulic cutting machine HD-35T

The HD-35T equipment of the precision four-column hydraulic cutting machine is to manually place the finished product on the cutting machine's knife die, push the moving pad to the working position, start the equipment, drive the knife patch board down, cut off the peripheral waste of the product, raise the stand board back to the position, manually pull out the pad, manually take out the product and remove the leftover material, and enter the next working cycle.

Key words:

Blister machine series

Classification:

Product Details

Precision four-column hydraulic cutting machine HD-35T

equipment is to manually place the full-plate product on the cutting machine's knife die, push the moving pad to the working position, start the equipment, a die table drives the knife sticking plate down, a knife die cuts off the peripheral waste of the product, a knife station plate rises back to the position, manually pull out the pad, manually take out the product and remove the leftover material, and enter the next working cycle.

product specification

maximum blanking force 35T; Cutting size: 710*1220mm motor power> 3KW

up and down punching maximum stroke: 190mm;

Two-hand buttons are set on the front and rear operating surfaces to start

Product inquiry

online message

%{tishi_zhanwei}%

Contact Us

Address: Factory Building ,No. 9, 3293 Hongmei South Road, Minhang District, Shanghai

Zip Code: 201108

Tel: 021-66613330 021-66613320

Fax: 021-56558970

Mobile Phone: 13901833321 13585855550

Mailbox: hongdu@vip.sina.com